MOL complains after running startmol -X

Mel Herndon zarephath526 at gmail.com
Mon Apr 3 15:27:49 MDT 2006


Mattias,
I have the mol drivers installed...I have no sound and worse no
networking...I did not install your patch...but did install the bootx this
has improved the situation. See my copy of console output as MOL is started
to when I tell OS X to shutdown... I am actually on 192.168.1.1 for my
router...and using DHCP served out from my LinkSys router...I presume it is
just using a masked "pseudo" ip for networking...I tried switching it to an
actual static address...Safari states I am not connected to the
internet...and I can't ping -c3 www.yahoo.com

BTW how do I start it to run in a window, or switch back to my desktop in
gnome?

Running in PowerPC 7400 mode, 256 MB RAM
Timebase: 41.66 MHz, Bus: 166.64 MHz, Clock: 999 MHz
Using USB mouse on /dev/input/mice
OHCI USB controller registered
Could not open '/var/lib/mol/x11.kbd'
Fullscreen video on VT 9.
Could not open '/var/lib/mol/console.kbd'
Video driver(s): [xvideo] [console_video]

     640* 480, depth 8,15   { 0.0 } Hz
     800* 600, depth 8,15,32   { 70.0, 72.1, 74.9 } Hz
    1024* 768, depth 8,15,32   { 60.0, 70.0, 75.0 } Hz
    1152* 864, depth 8,15,32   { 59.9 } Hz
    1280*1024, depth 8,15,32   { 0.0, 60.0 } Hz
    1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
DHCP nameserver exported: 24.93.41.125
Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE

    ip/mask: 192.168.41.2/255.255.255.0  gw: 192.168.41.1
    broadcast: 192.168.41.255  nameserver: 192.168.41.1

ALSA sound driver (device 'default')

    CD    /dev/cdrom       CD/DVD         <read-only>   ------
    HFS+  /dev/hda12       Games          <rw> 30711 MB
----> /dev/hdb2 might be a boot-strap partition.
------> /dev/hdb5 is linux-mounted with write privileges.
Could not open '/dev/hdb5' with read-write permissions
No volumes found in '/dev/hdb'
    HFS+  /dev/sda3        iPod           <rw> 38115 MB
No volumes found in '/dev/sdb'

SCSI devices:

    /dev/sg1 SCSI-<1:0:0> CD/DVD PIONEER  DVD-RW  DVR-106D 1.05
    SCSI  /dev/cdrom       [CDROM/DVD driver]

USB device connect (2:2)

>> ==================================================
>> MacOS X Boot Loader 0.9.70 [96MB memory map patch]
>> Candidate boot volume: /mol-blk at 0/disk at 1:0
>> /mol-blk at 0/disk at 1:0,\mach_kernel (4330320 bytes)
>> /mol-blk at 0/disk at 1:0,\System\Library\Extensions.mkext
>> ==================================================

<*> IRQ vectorCanBeShared 3
<*> IRQ vectorCanBeShared 2
<*> Block Driver v1.1
<*> SCSI driver v1.03
<*> IRQ vectorCanBeShared 6
<*> IRQ vectorCanBeShared 4
<*> IRQ vectorCanBeShared 24
<*> IRQ vectorCanBeShared 5
<*> Ethernet driver 1.1
<*> MolAudio 1.2
<*> IRQ vectorCanBeShared 1
<*> MolEnet: Link up at 100 Mbps - Full Duplex
DHCP lease: 192.168.41.2
+ Video Driver v1.12
Autoswitching to console
DHCP lease: 192.168.41.2
DHCP lease: 192.168.41.2
cleaning up...
USB disconnect
Terminating threads...
DONE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.terrasoftsolutions.com/pipermail/mol-general/attachments/20060403/a72ba572/attachment.htm


More information about the mol-general mailing list