Nvidia support

[brad allison]

Nope.  Ben's kernel completely locks up too.

Ben's kernel booted fine, and I booted it with the "novideo" option in 
yaboot.

When it came up I ran Xconfiguration and changed the driver from "fbdev" 
to "nv" and ran then ran "startx" and it completely locked the box.

-b


On Thu, 16 May 2002, Kenshin Black wrote:

> That's with YDL kernel, i've been to busy to experiment with
> 2.4.19-pre8-ben0 kernel, but it seems to work with Quicksilver Nvidia.
> You should give it a try
> 
> www.ppckernel.org
> 
> > On Fri, 10 May 2002, Kenshin Black wrote:
> > 
> >> On 09/05/2002 12:07 PM, Kenshin Black wrote:
> >> 
> >> My card is also rev. 161 and the monitor is a Studio Display 17 CRT with the
> >> VGA connector. I'm getting 800x600 15bit (not very nice) with "fbdev" driver
> >> and the YDL 2.2 default kernel. If i use "nv" driver it hangs. If i try
> >> changing "fbdev" by "nv" it hangs in a black screen, if i use a bigger
> >> resolution with "fbdev", it goes to power saving mode indicating it's out if
> >> range.
> > 
> > I'm experiencing the exact same problem.
> > 
> > -b
> 
> _______________________________________________
> yellowdog-general mailing list
> yellowdog-general@lists.terrasoftsolutions.com
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
> 

-- 
                                 Brad Allison
                         AOL Core Services -- RHCE
  jackal.is.dreaming.org   jackal@aol.net   703.265.0908   aim:jackal242