YDL 2.3 USB issue

[Aurel Wisse]

> [root@localhost zorbas]# /sbn/lsmod
> bash: /sbn/lsmod: No such file or directory
That was "/sbin/lsmod". My fault. Please try this
again.

> usbserial.c: PalmConnect USB Serial converter
> detected
Do you yave a USB to serial converter? Or is this
supposed to be the ZIP drive?

> usb.c: USB device 10 (vend/prod 0x4b8/0x5) is not
According to www.linux-usb.org, this means that you
have an Epson Stylus printer. This is most likely a
bitmap printer (as opposed to a postscript printer),
so it will need its own driver.
The usblp driver seems to load, so there is only the
printer specific driver missing, try the steps in this
howto:
http://www.yellowdoglinux.com/support/solutions/ydl_general/usb_printer.shtml

Aurel
--- Paolo Aggio <zorbas@linuxmail.org> wrote:
> Dear Aurel...thanks again and :  :-)
> 
> Just after plugging in it as follow :
> 
> 
> 
> [zorbas@localhost zorbas]$ su
> Password:
> [root@localhost zorbas]# dmesg | tail
> usbserial.c: USB Serial support registered for
> PalmConnect USB Serial
> usbserial.c: PalmConnect USB Serial converter
> detected
> usbserial.c: PalmConnect USB Serial converter now
> attached to ttyUSB0 
> (or usb/tts/0 for devfs)
> usbserial.c: USB Serial support registered for
> generic KL5KUSB105D 
> USB->Serial
> kl5kusb105.c: KLSI KL5KUSB105 chipset USB->Serial
> Converter driver v0.3a
> hub.c: USB new device connect on bus1/1/3, assigned
> device number 10
> usb.c: USB device 10 (vend/prod 0x4b8/0x5) is not
> claimed by any active 
> driver.
> usb.c: registered new driver usblp
> printer.c: usblp0: USB Bidirectional printer dev 10
> if 0 alt 0 proto 2 
> vid 0x04B8 pid 0x0005
> printer.c: v0.11: USB Printer Device Class driver
> [root@localhost zorbas]# tail /var/log/messages
> Feb 26 20:02:34 localhost /etc/hotplug/usb.agent:
> missing kernel or user 
> mode driver kl5kusb105
> Feb 26 20:02:34 localhost modprobe: modprobe: Can't
> locate module 
> block-major-2
> Feb 26 20:02:34 localhost last message repeated 3
> times
> Feb 26 20:02:34 localhost kernel: hub.c: USB new
> device connect on 
> bus1/1/3, assigned device number 10
> Feb 26 20:02:34 localhost kernel: usb.c: USB device
> 10 (vend/prod 
> 0x4b8/0x5) is not claimed by any active driver.
> Feb 26 20:02:34 localhost /etc/hotplug/usb.agent:
> Setup printer for USB 
> product 4b8/5/100
> Feb 26 20:02:34 localhost kernel: usb.c: registered
> new driver usblp
> Feb 26 20:02:34 localhost kernel: printer.c: usblp0:
> USB Bidirectional 
> printer dev 10 if 0 alt 0 proto 2 vid 0x04B8 pid
> 0x0005
> Feb 26 20:02:34 localhost kernel: printer.c: v0.11:
> USB Printer Device 
> Class driver
> Feb 26 20:02:34 localhost /etc/hotplug/usb.agent:
> missing kernel or user 
> mode driver printer
> [root@localhost zorbas]# uname -r                   
>               
> 2.4.19-4a
> [root@localhost zorbas]# /sbn/lsmod
> bash: /sbn/lsmod: No such file or directory
> [root@localhost zorbas]# cat /proc/version
> Linux version 2.4.19-4a (root@kaelta.terraplex.com)
> (gcc version 2.95.4 
> 20010319 (prerelease/franzo/20011204)) #1 Wed Jun 5
> 01:34:59 EDT 2002
> 
> 
> Thanks again for Yours Kindness
> > 
> > Looking forwards
> > 
> > Paolo :-)
> > 
> > PS: Sorry 4 My "ENGLISH" too !!!
> 
> 
> 




__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, more
http://taxes.yahoo.com/