Thanks Again Aurel
Paolo Aggio
yellowdog-general@lists.terrasoftsolutions.com
Thu Feb 27 03:04:01 2003
--------------090206040008080200050507
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
> Dear Aurel...thanks again and : :-D
>
> Just after plugging in it as follow :
[root@localhost zorbas]# /sbin/lsmod
Module Size Used by Not tainted
kl5kusb105 12708 0 (unused)
usbserial 22496 0 [kl5kusb105]
usb-storage 61000 0
i2c-keywest 8544 0 (autoclean) (unused)
dmasound_pmac 53536 1 (autoclean)
i2c-core 19992 0 (autoclean) [i2c-keywest dmasound_pmac]
dmasound_core 16120 1 (autoclean) [dmasound_pmac]
soundcore 7240 3 (autoclean) [dmasound_core]
appletalk 28276 0 (autoclean)
ipx 25036 0 (autoclean)
md 67884 0 (unused)
[root@localhost zorbas]# /sbn/lsmod
> bash: /sbn/lsmod: No such file or directory
That was "/sbin/lsmod". My fault. Please try this
again.
>> usbserial.c: PalmConnect USB Serial converter
>> detected
>
>
Do you yave a USB to serial converter? Or is this
supposed to be the ZIP drive?
>> usb.c: USB device 10 (vend/prod 0x4b8/0x5) is not
>
>
According to www.linux-usb.org, this means that you
have an Epson Stylus printer. This is most likely a
bitmap printer (as opposed to a postscript printer),
so it will need its own driver.
The usblp driver seems to load, so there is only the
printer specific driver missing, try the steps in this
howto:
http://www.yellowdoglinux.com/support/solutions/ydl_general/usb_printer.shtml
Aurel
--- Paolo Aggio <zorbas@linuxmail.org> wrote:
>> Dear Aurel...thanks again and : :-)
>>
>> Just after plugging in it as follow :
>>
>>
>>
>> [zorbas@localhost zorbas]$ su
>> Password:
>> [root@localhost zorbas]# dmesg | tail
>> usbserial.c: USB Serial support registered for
>> PalmConnect USB Serial
>> usbserial.c: PalmConnect USB Serial converter
>> detected
>> usbserial.c: PalmConnect USB Serial converter now
>> attached to ttyUSB0
>> (or usb/tts/0 for devfs)
>> usbserial.c: USB Serial support registered for
>> generic KL5KUSB105D
>> USB->Serial
>> kl5kusb105.c: KLSI KL5KUSB105 chipset USB->Serial
>> Converter driver v0.3a
>> hub.c: USB new device connect on bus1/1/3, assigned
>> device number 10
>> usb.c: USB device 10 (vend/prod 0x4b8/0x5) is not
>> claimed by any active
>> driver.
>> usb.c: registered new driver usblp
>> printer.c: usblp0: USB Bidirectional printer dev 10
>> if 0 alt 0 proto 2
>> vid 0x04B8 pid 0x0005
>> printer.c: v0.11: USB Printer Device Class driver
>> [root@localhost zorbas]# tail /var/log/messages
>> Feb 26 20:02:34 localhost /etc/hotplug/usb.agent:
>> missing kernel or user
>> mode driver kl5kusb105
>> Feb 26 20:02:34 localhost modprobe: modprobe: Can't
>> locate module
>> block-major-2
>> Feb 26 20:02:34 localhost last message repeated 3
>> times
>> Feb 26 20:02:34 localhost kernel: hub.c: USB new
>> device connect on
>> bus1/1/3, assigned device number 10
>> Feb 26 20:02:34 localhost kernel: usb.c: USB device
>> 10 (vend/prod
>> 0x4b8/0x5) is not claimed by any active driver.
>> Feb 26 20:02:34 localhost /etc/hotplug/usb.agent:
>> Setup printer for USB
>> product 4b8/5/100
>> Feb 26 20:02:34 localhost kernel: usb.c: registered
>> new driver usblp
>> Feb 26 20:02:34 localhost kernel: printer.c: usblp0:
>> USB Bidirectional
>> printer dev 10 if 0 alt 0 proto 2 vid 0x04B8 pid
>> 0x0005
>> Feb 26 20:02:34 localhost kernel: printer.c: v0.11:
>> USB Printer Device
>> Class driver
>> Feb 26 20:02:34 localhost /etc/hotplug/usb.agent:
>> missing kernel or user
>> mode driver printer
>> [root@localhost zorbas]# uname -r
>>
>> 2.4.19-4a
>> [root@localhost zorbas]# /sbn/lsmod
>> bash: /sbn/lsmod: No such file or directory
>> [root@localhost zorbas]# cat /proc/version
>> Linux version 2.4.19-4a (root@kaelta.terraplex.com)
>> (gcc version 2.95.4
>> 20010319 (prerelease/franzo/20011204)) #1 Wed Jun 5
>> 01:34:59 EDT 2002
>>
>>
>> Thanks again for Yours Kindness
>
>
>>> >
>>> > Looking forwards
>>> >
>>> > Paolo :-)
>>> >
>>> > PS: Sorry 4 My "ENGLISH" too !!!
>>
>>
--------------090206040008080200050507--