KPalm Problems

[yellowdog-general@lists.terrasoftsolutions.com]

Cannot get Hotsync to work with Sony Clie.

System log follows.  Any clues here?

Thanks!!!!

George

-----

Jul 10 09:06:44 Scabbers kernel: hub.c: new USB device 10:18.0-1, assigned
address 2

Jul 10 09:06:44 Scabbers kernel: usb.c: USB device 2 (vend/prod
0x54c/0x66) is not claimed by any active driver.

Jul 10 09:06:47 Scabbers /etc/hotplug/usb.agent: Setup visor for USB
product 54c/66/100

Jul 10 09:06:47 Scabbers kernel: usb.c: registered new driver serial

Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
registered for Generic

Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial Driver core v1.4
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
registered for Handspring Visor / Palm 4.0 / Clié 4.x
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter detected
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
Clié 4.x: Number of ports: 2
iso-8859-
1Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
Clié 4.x: port 1, is for Generic use and is bound to ttyUSB0
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
Clié 4.x: port 2, is for HotSync use and is bound to ttyUSB1

Jul 10 09:06:47 Scabbers kernel: visor.c: visor_startup - error getting
first unknown palm command

Jul 10 09:06:47 Scabbers kernel: visor.c: visor_startup - error getting
second unknown palm command
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
registered for Sony Clié 3.5
iso-8859-1
Jul 10 09:06:47 Scabbers kernel: visor.c: USB HandSpring Visor, Palm m50x,
Sony Clié driver v1.6

Jul 10 09:07:45 Scabbers kernel: usb.c: USB disconnect on device 10:18.0-1
address 2
iso-8859-1
Jul 10 09:07:45 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter now disconnected from ttyUSB0
iso-8859-1
Jul 10 09:07:45 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
/ Clié 4.x converter now disconnected from ttyUSB1

Jul 10 09:07:45 Scabbers kernel: ohci1394: $Rev: 578 $ Ben Collins
<bcollins@debian.org>

Jul 10 09:07:45 Scabbers kernel: ohci1394_0: Unexpected PCI resource
length of 1000!

Jul 10 09:07:45 Scabbers kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40]
 MMIO=[f5000000-f50007ff]  Max Packet=[2048]