KPilot Problems

[yellowdog-general@lists.terrasoftsolutions.com]

OK, I fixed my own problem.

1.  The KPilotDeamon must be manually launced before the KPilot (not
KPalm) application is started.

2.  The KPilot application chokes on passwords, so I disabled that on the
Palm device.

Result: Worked fine.

Problem solved.

George

-----

> Cannot get Hotsync to work with Sony Clie.
>
> System log follows.  Any clues here?
>
> Thanks!!!!
>
> George
>
> -----
>
> Jul 10 09:06:44 Scabbers kernel: hub.c: new USB device 10:18.0-1, assigned
> address 2
>
> Jul 10 09:06:44 Scabbers kernel: usb.c: USB device 2 (vend/prod
> 0x54c/0x66) is not claimed by any active driver.
>
> Jul 10 09:06:47 Scabbers /etc/hotplug/usb.agent: Setup visor for USB
> product 54c/66/100
>
> Jul 10 09:06:47 Scabbers kernel: usb.c: registered new driver serial
>
> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
> registered for Generic
>
> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial Driver core v1.4
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
> registered for Handspring Visor / Palm 4.0 / Clié 4.x
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter detected
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
> Clié 4.x: Number of ports: 2
> iso-8859-
> 1Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
> Clié 4.x: port 1, is for Generic use and is bound to ttyUSB0
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
> Clié 4.x: port 2, is for HotSync use and is bound to ttyUSB1
>
> Jul 10 09:06:47 Scabbers kernel: visor.c: visor_startup - error getting
> first unknown palm command
>
> Jul 10 09:06:47 Scabbers kernel: visor.c: visor_startup - error getting
> second unknown palm command
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
> registered for Sony Clié 3.5
> iso-8859-1
> Jul 10 09:06:47 Scabbers kernel: visor.c: USB HandSpring Visor, Palm m50x,
> Sony Clié driver v1.6
>
> Jul 10 09:07:45 Scabbers kernel: usb.c: USB disconnect on device 10:18.0-1
> address 2
> iso-8859-1
> Jul 10 09:07:45 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now disconnected from ttyUSB0
> iso-8859-1
> Jul 10 09:07:45 Scabbers kernel: usbserial.c: Handspring Visor / Palm 4.0
> / Clié 4.x converter now disconnected from ttyUSB1
>
> Jul 10 09:07:45 Scabbers kernel: ohci1394: $Rev: 578 $ Ben Collins
> <bcollins@debian.org>
>
> Jul 10 09:07:45 Scabbers kernel: ohci1394_0: Unexpected PCI resource
> length of 1000!
>
> Jul 10 09:07:45 Scabbers kernel: ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40]
>  MMIO=[f5000000-f50007ff]  Max Packet=[2048]
>
> _______________________________________________
> yellowdog-general mailing list
> yellowdog-general@lists.terrasoftsolutions.com
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
>