KPilot Problems

[yellowdog-general@lists.terrasoftsolutions.com]

One more final note for others on this.

You must set USB device (ttyUSB*) permissions to r/w for user group and be
sure that you (not the root account) are a member of the user group.

Then, you're good to go.

George

> OK, I fixed my own problem.
>
> 1.  The KPilotDeamon must be manually launced before the KPilot (not
> KPalm) application is started.
>
> 2.  The KPilot application chokes on passwords, so I disabled that on the
> Palm device.
>
> Result: Worked fine.
>
> Problem solved.
>
> George
>
> -----
>
>> Cannot get Hotsync to work with Sony Clie.
>>
>> System log follows.  Any clues here?
>>
>> Thanks!!!!
>>
>> George
>>
>> -----
>>
>> Jul 10 09:06:44 Scabbers kernel: hub.c: new USB device 10:18.0-1,
>> assigned
>> address 2
>>
>> Jul 10 09:06:44 Scabbers kernel: usb.c: USB device 2 (vend/prod
>> 0x54c/0x66) is not claimed by any active driver.
>>
>> Jul 10 09:06:47 Scabbers /etc/hotplug/usb.agent: Setup visor for USB
>> product 54c/66/100
>>
>> Jul 10 09:06:47 Scabbers kernel: usb.c: registered new driver serial
>>
>> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
>> registered for Generic
>>
>> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial Driver core
>> v1.4
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
>> registered for Handspring Visor / Palm 4.0 / Clié 4.x
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm
>> 4.0
>> / Clié 4.x converter detected
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
>> Clié 4.x: Number of ports: 2
>> iso-8859-
>> 1Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
>> Clié 4.x: port 1, is for Generic use and is bound to ttyUSB0
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: visor.c: Handspring Visor / Palm 4.0 /
>> Clié 4.x: port 2, is for HotSync use and is bound to ttyUSB1
>>
>> Jul 10 09:06:47 Scabbers kernel: visor.c: visor_startup - error getting
>> first unknown palm command
>>
>> Jul 10 09:06:47 Scabbers kernel: visor.c: visor_startup - error getting
>> second unknown palm command
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm
>> 4.0
>> / Clié 4.x converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: usbserial.c: Handspring Visor / Palm
>> 4.0
>> / Clié 4.x converter now attached to ttyUSB1 (or usb/tts/1 for devfs)
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: usbserial.c: USB Serial support
>> registered for Sony Clié 3.5
>> iso-8859-1
>> Jul 10 09:06:47 Scabbers kernel: visor.c: USB HandSpring Visor, Palm
>> m50x,
>> Sony Clié driver v1.6
>>
>> Jul 10 09:07:45 Scabbers kernel: usb.c: USB disconnect on device
>> 10:18.0-1
>> address 2
>> iso-8859-1
>> Jul 10 09:07:45 Scabbers kernel: usbserial.c: Handspring Visor / Palm
>> 4.0
>> / Clié 4.x converter now disconnected from ttyUSB0
>> iso-8859-1
>> Jul 10 09:07:45 Scabbers kernel: usbserial.c: Handspring Visor / Palm
>> 4.0
>> / Clié 4.x converter now disconnected from ttyUSB1
>>
>> Jul 10 09:07:45 Scabbers kernel: ohci1394: $Rev: 578 $ Ben Collins
>> <bcollins@debian.org>
>>
>> Jul 10 09:07:45 Scabbers kernel: ohci1394_0: Unexpected PCI resource
>> length of 1000!
>>
>> Jul 10 09:07:45 Scabbers kernel: ohci1394_0: OHCI-1394 1.0 (PCI):
>> IRQ=[40]
>>  MMIO=[f5000000-f50007ff]  Max Packet=[2048]
>>
>> _______________________________________________
>> yellowdog-general mailing list
>> yellowdog-general@lists.terrasoftsolutions.com
>> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
>>
>
> _______________________________________________
> yellowdog-general mailing list
> yellowdog-general@lists.terrasoftsolutions.com
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
>