MOL on Beige G3 (I'm lost)

[Rob]

I have made it through startmol --test successfully and can get to the
chime before mol crashes.  I have left my OS 9 cd in the drive but mol
doesn't seem to see it either.

My system:
Beige G3/300
256 Mb RAM
OS 10.2 hfs+ /dev/hda7
OS 9.2.2 hfs /dev/hda8
YDL 2.3 /dev/hda11

I am trying to run the OS 9 partition with mol.  I haven't tried OS X.

This is the output of the startmol command:

[rob@localhost rob]$ startmol
Mac-on-Linux 0.9.65 Copyright (C) 1997-2002 Samuel Rydh
Config dir: /etc/mol
Data dir: /usr/share/mol/0.9.65
Session 0. Lockfile: /var/lock/mol-0
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 16.70 MHz
128MB RAM mapped at 0x40000000
Running in PowerPC G3 mode
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.nw'
Could not open '/var/lib/mol/x11.kbd'
Video module 'xvideo' installed.
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  640* 480, depth 8,15   { 0.0 } Hz
MODE:  800* 600, depth 8,15   { 0.0 } Hz
MODE: 1024* 768, depth 8,15,32   { 70.0, 72.2, 75.0 } Hz
MODE: 1152* 864, depth 8,15   { 0.0 } Hz
MODE: 1280*1024, depth 8,15   { 0.0 } Hz
MODE: 1600*1200, depth 8,15   { 0.0 } Hz

No video mode match the default one.
Starting in video mode 640*480, depth 8, 0.0 Hz  [offs:0, rb:640]
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
---> DHCP server not installed
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE
----> Sound Disabled. Failed to open /dev/dsp

HFS  images/moldisk.i MOL                <read-only>     0 MB
HFS  /dev/hda8        Mac OS 9           <read-write> 4304 MB

Searching /dev/hda8 for a 'Mac OS ROM' file
/dev/hda8: No 'Mac OS ROM' file found

Searching images/moldisk.im for a 'Mac OS ROM' file
images/moldisk.im: No 'Mac OS ROM' file found

--- No bootable disk found ---
No newworld ROM was found
cleaning up...
---> DHCP server not installed
Terminating threads...
DONE
[rob@localhost rob]$

Can someone out there help me get this running?

TIA,
Rob