More g5 booting

[Ian Marlier]

Still trying to get the pre-release of YDL for the G5 to boot...

I have to do install-safe, instead of graphical or plain text mode...this is
with the Radeon 9800 card and a 23" Cinema display.

My machine has a 250-GB ATA hard drive, the standard Apple BTO option...

In any case, everything seems fine until the kernel starts looking for
drives...the boot messages are below, and I'd love some help if anyone can
explain any of this to me...

ide0: found Apple K2 ATA-6 controller, but ID 3
Probing IDE interface ide0
hda: SONY DVD RW DW-U10A, ATAPI CD/DVD-ROM drive
hda: Enabling Ultra DMA 2
ide0 at 0xf1105000 - 0xf1105007, 0xf1105160 on irq 39
had: attached ide-cdrom driver
had: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 8192 kB cache, UDMA (33)
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.0
scsi0: SCSI host adapter emulation for IDE ATAPI devices
mesh: configured for synchronous 5 MB/s
ata1: SATA max UDMA/133 cmd 0xF1108000 ctl 0xF1108020 bmdma 0xF1108030 irq 0
ata2: SATA max UDMA/133 cmd 0xF1108100 ctl 0xF1108120 bmdma 0xF1108130 irq 0
ata1: device detected.
ata1: dev 0 ATA, max UDMA/133, 490234752 sectors (lba 48)
ata1: dev 0 configured for UDMA/133
ata2: no device detected
scsi1: ata_k2
scsi2: ata_k2
    Vendor: ATA     Model: Maxtor 6Y250M0       Rev: 0.72
    Type: Direct-Access                     ANSI SCSI revision: 05
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI drive sda: 490234752 512-byte hdwr sectors (251000 MB)
Partition check:
    sda:<3>ata1: DMA timeout, stat 0x1
ATA: abnormal status 0xD0 on port 0xF110801C