Newbie: Trouble with Dazzle PCMCIA SmartMedia Reader

[yellowdog-general@lists.terrasoftsolutions.com]

I am running YDL 3.0 on a PowerBook G4 400 (TiBook)

I cannot get YDL to recognize my PCMCIA Card (Dazzle SmartMedia Reader).
Basically, when I  "service pcmcai start" I get=20

-------------
Starting PCMCIA services: modulesmodprobe: Can't locate module
pcmcia_core.o
modprobe: Can't locate module yenta_socket.o
modprobe: Can't locate module ds.o
 cardmgr
-------------

So, I load manually -->=20

-------------
insmod pcmcia_core
insmod yenta_socket
insmod ds
Service pcmcia start
-------------

And I get "Starting PCMCIA service: cardmgr"
"tail -F /var/log/messages" gives:

-------------
Kernel: Recource conflict with: 90000000..9ffffff (1200), name: PCI
CardBus #11
Kernel: Recource conflict with: f3000000..f33ffff (200), name: PCI
CardBus #11
Kernel: Recource conflict with: 1000..8fff (100), name: PCI CardBus #11
Kernel: Recource conflict with: 9000..90ff (100), name: PCI CardBus #11
Kernel: Yenta IRQ list 0000, PCI irq58
Kernel: Socket status: 30000006
cardmgr[1360]: stating, version is 3.1.31
cardmgr[1360]: watching 1 sockets
cardmgr[1360]: Card Services release does not match	=09
cardmgr[1360]: exiting
-------------

Now I get the two beeps whenever I insert/take out my Dazzle card -
However - I still can't access the drive. =20

"tail -F /var/log/messages" gives:

-------------
cardmgr[1361]: socket 0: ATA/IDE Fixed Disk
cardmgr[1361]: executing: 'modprobe ide-cs'
cardmgr[1361]: + modprobe: Can't locate module ide-cs
cardmgr[1361]: modprobe exited with status 255
cardmgr[1361]: module .lib.modules/2.4.20-8d/pcmcia/ide-cs.o not
available
cardmgr[1361]: get dev info on socket 0 failed: Resource temporarily
unavailable
cardmgr[1361]: exiting
--------------



Help?


Thanks,

Michael