Linksys WPC11 PCMCIA

[John VanHoorn]

I've just discovered the "Linux PCMCIA Howto"
http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO.html

and am plowing through it as well.


---------- Original Message ----------------------------------
From: "John VanHoorn" <john@networkingworlds.com>
Reply-To: yellowdog-general@lists.terrasoftsolutions.com
Date:  Wed,  3 Sep 2003 14:00:19 -0400

I have YDL 3.0 with kernel 2.4.20-8d installed on a Powerbook G3
(lombard-bronze keyboard).

I have not found documentation that completely explains the process for enabling and configuring a Linksys WPC11 PCMCIA card.

I've confirmed that the PCMCIA module loads during the machine boot process.

But "cardctl ident" results in no devices found.
I attempted to use some of the troubleshooting referenced here:
http://www.linuxquestions.org/questions/archive/3/2003/02/4/45802
But many key steps in the resolution appear to be missing.

I've configured the /etc/pcmcia/config.opts file to reflect the following information:
http://www.yellowdoglinux.com/support/solutions/ydl_general/pcmcia-nic.shtml

but to no avail.

Any help will be greatly appreciated.

John Van Hoorn
john@networkingworlds.com

_______________________________________________
yellowdog-general mailing list
yellowdog-general@lists.terrasoftsolutions.com
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general