B&W G3 drive problems
Michael George
yellowdog-general@lists.terrasoftsolutions.com
Mon Sep 15 05:45:01 2003
> I had simila problems...
>
> I then used OS 9.2.2 to re-partition the Hard Drive.
> open Drive Setup.
> With out having ANY drives selected, go to Functions -> Initilization
> Options
> Choose Low Level Format.
> THEN select your 20Gb HD and Initilize. This will force the apple
> drivers to install on the drive.
>
> Reboot and re-install YDL
>
> This worked for me... BTW do you have a Rev 2 board? I didn't try
> with the Rev.1. I'm now running a Rev 2 board w/ a 40 Gb Seagate
> Barracuda Ultra ATA 133 with a WD 20 GB Slave.
Where do I find an indication which revision board I have. I found the
Apple copyright on this one, but there's no Rev indicator. Just a
serial number ending in "-A". Does that mean this is a Rev1 board?
-Michael