Powerbook Aluminum PCMCIA

[Allon Bendavid]

Christopher-

Thanks a lot.  That is very helpful.  Didn't you have to modify the memory
resources in config.opts as well?  I have modified mine so many times
already; could you paste me what you are using?

Also, when you said, Internet configuration wizard; did you mean Network
control panel?  I assume you created a new hardware device that was a
wireless card with the Lucent driver, than you created a new logical device
that was wireless and bound to that hardware device; correct?

-Allon


On 8/8/04 12:05 PM, "Christopher Brown" <christopher@soundtorrent.com>
wrote:

> Allon,
> 
> This worked for me. I edited my /etc/sysconfig/pcmcia file to look like
> this:
> 
> PCMCIA=yes
> PCIC=i82365
> PCIC_OPTS=do_scan=0
> CORE_OPTS=
> CARDMGR_OPTS=-f
> 
> 
> Saved the changes, rebooted, ran Internet Configuration Wizard and
> everything was good. I'm using the Orinoco Silver on a PowerBook Aluminum
> 15" but I'm sure this part of the configuration would be the same for your
> card. I'm certainly no expert at this so if anyone else knows better maybe
> you could shed a little light on this subject.
> 
> 
> 
> -- 
> 
> Christopher

----------------------------------------------------------------------------
Allon Bendavid                                          Imacination Software
allon@imacination.com                            http://www.imacination.com/
818-706-8664
----------------------------------------------------------------------------
Visit Imacination and start selling on the Web today with Ch-Ching!
----------------------------------------------------------------------------