Export X Windows Display to YDL 4.0

[Herzig, Harold E. (US SSA)]

Good.
I have already sent a similar request for info to Kai Staats and Owen
Stampone, both of TSS.
 

Harold E. Herzig

  BAE SYSTEMS     Information and Electronic Systems Integration, Inc.

Communication, Navigation, Identification and Reconnaissance

harold.herzig at baesystems.com

(973)636-7540

 

	-----Original Message-----
	From: yellowdog-general-bounces at lists.terrasoftsolutions.com
[mailto:yellowdog-general-bounces at lists.terrasoftsolutions.com] On
Behalf Of Butler, Thomas E. (US SSA)
	Sent: Wednesday, October 20, 2004 11:12 AM
	To: yellowdog-general at lists.terrasoftsolutions.com
	Subject: Export X Windows Display to YDL 4.0
	
	

	Using a PowerBook with YDL 3.01 installed, in the past I have
been able to export an externally running X windows application to the
PowerBook with the following procedure:

	(1)    Open Konsole on YDL 3.01 PowerBook,  with IP address
ww.xx.yy.zz

	(2)    xhost +

	(3)    telnet to machine which is to run X windows application

	(4)    In telnet window, on X windows application machine,
export DISPLAY=ww.xx.yy.zz:0.0

	(5)    In telnet window, on X windows application machine, start
application

	This gets the application windows to pop up on the YDL 3.01
Powerbook.

	Now when I try the same thing with YDL 4.0 installed on the
Powerbook, at step (5) above I get the message "Error: Failed to open
display....." .  Does anyone know what is going on ?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.terrasoftsolutions.com/pipermail/yellowdog-general/attachments/20041020/af298a80/attachment.htm