[ydl-gen] HFS+ mount is read only -- how to make RW? (YDL 4.0.1)

[Eric Dunbar]

Well, I did a little Googling and found my answer.

It seems fsck.hfsplus does not exist for Linux (at least, that was as
of beginning of 2004... doubt that's changed in the interrim). Instead
a work-around was reported here:
<http://lists.debian.org/debian-powerpc/2004/01/msg00984.html> that I'll try:

From: Sebastian Henschel <debian at kodeaffe dot de>
Date: Mon, 26 Jan 2004 16:01:15 +0100
"well, i have exactly the same problem. but i found a work around for that:
mount the hfs+ partition via hpmount from the package hfsplus
(http://www.penguinppc.org/usr/ftp/pub/hfsplus/hfsplus.src.tar.gz).

this by itself does not mount the partition at all, but stops with an
error message (v1.0.4). though something is done with that partition,
because afterwards, i can mount it for writing again in the regular
way with "mount -t hfsplus" (recent benh-2.6 kernel)."

Eric.

On 11/25/05, Eric Dunbar <eric.dunbar at gmail dot com> wrote:
> Thanks for your response.
>
> Found the error message in /var/log/messages:
> HFS+-fs warning: Filesystem was not cleanly unmounted, running
> fsck.hfsplus is recommended.  mounting read-only.
>
> One problem. fsck.hfsplus seems to be missing :-( (fsck reports:
> fsck 1.35 (28-Feb-2004)
> fsck: fsck.hfsplus: not found
> ./fsck: Error 2 while executing fsck.hfsplus for /dev/hdc7
> )
>
> How do I get fsck.hfsplus?
>
> All my system has in /sbin are:
> dosfsck
> e2fsck
> fsck
> fsck.cramfs
> fsck.ext2
> fsck.ext3
> fsck.msdos
> fsck.vfat
>
> Thanks, Eric.
>
> On 11/25/05, peter.g.harper at magnox.co.uk <peter.g.harper at magnox.co.uk> wrote:
> >
> > Sometimes the system will mount filesystems ro if it problems when mounting
> > it
> > at boot time. Look in /var/log/messages? Unmount the disk, fsck it them
> > remount it?
> >
> > Peter
>
> > Subject:    [ydl-gen] HFS+ mount is read only -- how to make RW? (YDL
> >             4.0.1)
> > Hello, I have an HFS+ partition that I always mount on boot. It has
> > now become read-only and I would like to be able to write to it as
> > well.
> >
> > Until recently I was able to use it to store files on this partition.
> > Now it's become read-only (after a power failure, I suspect).
> >
> > This happened once to me under YDL 3.0.1 when I caused YDL 3 to kernel
> > panic using df (or was that du) on the HFS+ partition (solution:
> > reformat the partition in OS X).
> >
> > That problem with du (or df) was fixed in YDL 4.
> >
> > Now, it seems that somehow my HFS+ partition has been "damaged" again,
> > and I can't write to it even though mount says it's rw:
> >
> > /dev/hdc8 on / type ext3 (rw)
> > none on /proc type proc (rw)
> > none on /sys type sysfs (rw)
> > none on /dev/pts type devpts (rw,gid=5,mode=620)
> > none on /dev/shm type tmpfs (rw)
> > /dev/hdc10 on /home type ext3 (rw)
> > /dev/hdc7 on /mnt/macosx type hfsplus (rw)
> >
> >
> > Does anyone know what the problem is and/or how to fix it (i.e. make
> > it read-write again)?
> >
> > Eric.