[ydl-gen] SSH and hung with YDL 4.0 and G4

[Aaron Urbain]

you change the switch to a hub and it works?
Invetigate your cisco port settings.  Are your two machines running same
speed and duplex?  Use ethtool or miitool to find out.
If not, hardcode to 100/Full.


On 10/26/06, Emmanuel Stapf [ES] <manus at eiffel.com> wrote:
>
> > Let's try again --If I understand correctly, you have two
> > machines, one a Mac running YDL and Sun box running Solaris.
> > When moving data from the Sun to the Mac over scp, you are
> > seeing a time-out.
> >
> >       Is this correct?
>
> Yes.
>
> >       Can you bypass switches w/a cross over cable?
>
> I did not try the crossover cable because the machines are far from each
> other.
> However, I've tried with putting a 10Mbits hub in between and the
> transfert is
> ok.
>
> >       Are there any bandwidth limiters in your environment?
>
> Not that I know.
>
> >       Have you tried rsync instead?
>
> No.
>
> >       Are you moving open directories or tar balls?
>
> Just a big ISO files.
>
> Thanks,
> Manu
>
> _______________________________________________
> yellowdog-general mailing list
> yellowdog-general at lists.terrasoftsolutions.com
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
> HINT: to Google archives, try  '<keywords> site:terrasoftsolutions.com'
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.terrasoftsolutions.com/pipermail/yellowdog-general/attachments/20061026/922a0ed2/attachment.html