local network using ethernet and modem

[Russell Brunet]

On 9/19/02 1:04 PM, "Chuck Coleman" <cnk_coleman@mac.com> wrote:

> on 9/19/02 10:35 AM, Russell Brunet at brunet@mac.com wrote:
> 
>> I tried the tulip driver and it didn't work. Basically there was gobs of
>> info on the internet saying that my nic wasn't supported. I got a different
>> one from work that now works. So now both of my machines are showing
>> hardware addresses but I still can't get them to talk to each other. What
>> should I use for the default gateway in my setup?
> 
> The gateway should be the address of your router. So if your router is
> 192.168.1.1 that should be your gateway also. The gateway points to the next
> link in the LAN/WAN.
> 
> Chuck
> 
> _______________________________________________
> yellowdog-newbie mailing list
> yellowdog-newbie@lists.terrasoftsolutions.com
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie


Or in my case I figured out, just the IP of one of my two machines (I don't
have a router, only two machines connected with crossover cable)