Trying to install on a 3400c PowerBook. Help! (corrected)
Derick Centeno
aguilarojo at verizon.net
Mon Aug 8 22:32:32 MDT 2005
If memory serves me correctly, YDL 3.0 still used apt-get, yum was
developed a few months later. Which means you can probably still get
yum to run on 3.0 with a bit of work.
You got this far so you are up to it.
Congratulations, Deacon!
On Aug 9, 2005, at 12:23 AM, Deacon Nikolai wrote:
> I have it up and running! Yum appears not to be working on 3.0, so
> this is another hurdle, but having it all installed and working is
> great. Again, thank you for all the help!
>
> In Christ,
> Deacon Nikolai
> http://www.Stanosheck.com
>
>
>
> On Aug 8, 2005, at 8:33 PM, Deacon Nikolai wrote:
>
>> Dear Derick,
>>
>> Actually one of your responses to another person lead me to read
>> the 2.2 directions rather than just the 3.0 and 4.0 directions I had
>> read and it was more clear about something that helped me to get the
>> install working! Right now the 3400c is on the second disk of the
>> install. So far, so good! I will let you know if all went to plan and
>> if I have any other questions. Again thanks for the help and the
>> philosophy lesson. I would not be this far without your valuable
>> expertise! :-)
>>
>> In Christ,
>> Deacon Nikolai
>> http://www.Stanosheck.com
>>
>>
>> On Aug 8, 2005, at 7:33 PM, Derick Centeno wrote:
>>
>>
>>> Hi Deacon Nikolai:
>>> We are all learners, here. Interesting that there is a similar
>>> statement regarding the purpose of life stated in as ancient a work
>>> as the Bhagavadgita which is only one text of the Mahabharata. A
>>> similar phrase is found in the Epics of Gilgamesh and I'm sure that
>>> sentence has been repeated throughout the human experience. But
>>> that is enough philosophy for today!
>>>
>>> Since you are running YDL 4.01 elsewhere you may have a ready tool
>>> which you can use, which many others do not. I know I didn't. Take
>>> your YDL 3.0.1 disks and have them examined under YDL 4.0.1! This
>>> is how you do it.
>>>
>>> When you are on the Mac with YDL 4.0.1, first make sure the Mac is
>>> shutdown. Then boot it up, Press the c key. This will cause the
>>> Mac to switch to YDL 4.0.1. Keep pressing the c key. A black
>>> screen appears, let go and clear that line of c's by deleting.
>>>
>>> Now type:
>>>
>>> install mediacheck
>>>
>>> Wait till it this program begins. Then click to get to the test
>>> where mediacheck will check any CD you place into your CD drive.
>>> Place those YDL 3.0.1 CD disks there, it will test them for
>>> everything. There is a caveat here though; I'm not sure if
>>> mediacheck will only examine those disks within it's version. In
>>> other words, the program may be intelligent enough to distinguish
>>> between 3.0.1 and 4.0 or 4.0.1 if that is the case then it may
>>> inspect only 4.0 or 4.0.1 CDs considering all others failures.
>>>
>>> In which case we try a different approach, more techie. See this
>>> link and try it out:
>>>
>>> http://rhlinux.redhat.com/anaconda/manualtest.html
>>>
>>> One more thing, accessing Sharp (www.sharplabs.com) is different
>>> from accessing the YDL FAQ pages which reside on a specific sharp
>>> server set aside for that purpose. If it cannot be accessed via the
>>> link provided then it is under repair or being moved to another
>>> server or Sharp has changed it's mind regarding the YDL FAQ pages.
>>> You can try again at another time. Meanwhile, I hope that this is
>>> helpful.
>>>
>>> Best wishes...
>>>
>>> On Aug 8, 2005, at 8:05 PM, Deacon Nikolai wrote:
>>>
>>>
>>>
>>>> Dear Derick,
>>>>
>>>> I apologize for not being clearer.
>>>>
>>>> I originally meant to install 4.0.1 on my 3400c but thanks to you I
>>>> realized this was not possible. After finally burning the CDs
>>>> correctly, I installed 4.0.1 on my iBook running Mac OSX 10.4.2.
>>>> This was very simple for me and has been running like a dream.
>>>>
>>>> Daily I seem to keep learning more from both trial and error
>>>> and your emails. What I am having trouble with now is my 3400c. I
>>>> have a minimal install of Mac OS 8.5 on it. I got BootX working
>>>> finally and am able to get it to start booting from the 3.0.1 CD to
>>>> install. However I am getting errors when trying this. It does not
>>>> always stop at the same point, but I have gotten various messages
>>>> before it stopped including most often "I can't recover from this"
>>>> and "Warning unable to open an initial console" and "Will reboot in
>>>> 180 seconds".
>>>>
>>>> I have been trying to access the site you mention on my iBook,
>>>> but keep getting this error when trying: Safari can’t open the page
>>>> “http://www.sharplabs.com:8668/space/start” because it could not
>>>> connect to the server “www.sharplabs.com”. yet I can got to
>>>> www.sharplabs.com just fine!
>>>>
>>>> I will try going to in in Firefox after I get it from Yum
>>>> thanks to your help! Thank you again Derick!
>>>>
>>>> In Christ,
>>>> Deacon Nikolai
>>>> http://www.Stanosheck.com
>>>>
>>>>
>>>
>>> _______________________________________________
>>> yellowdog-newbie mailing list
>>> yellowdog-newbie at lists.terrasoftsolutions.com
>>> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
>>>
>>> _______________________________________________
>>> yellowdog-newbie mailing list
>>> yellowdog-newbie at lists.terrasoftsolutions.com
>>> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
>>>
>>>
>>>
>>>
>>
>> _______________________________________________
>> yellowdog-newbie mailing list
>> yellowdog-newbie at lists.terrasoftsolutions.com
>> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
>>
>>
>>
>
> _______________________________________________
> yellowdog-newbie mailing list
> yellowdog-newbie at lists.terrasoftsolutions.com
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-newbie
>
More information about the yellowdog-newbie
mailing list