Xserve G4 RAID Config
cH4os
eME at cH4os.com
Wed Nov 23 09:10:31 MST 2005
>>
>> Is it possible to set the drives in a "software RAID 10" via
>> software RAID (2 striping RAIDs which are mirrored, to get one
>> big drive) and boot YDL from this RAID? Or is it better/possible
>> to boot from a "standard" drive and use the others in a RAID 5?
>
> I found that creating a bootable drive from software RAID was so
> difficult that it is not practical to boot from a software RAID
> array. Perhaps you can mount your boot disk on a single drive and
> use RAID 5 for the the additional three drives. You'll still get
> fast performance and similar space out of three disks using RAID 5
> that you would with four disks at RAID 10.
>
I agree, I use, 1 boot partition (first), then the RAID partition,
then a Swap Partition (last)
Then burn a CD with the Boot partition, as redundancy...
More information about the yellowdog-newbie
mailing list