Subject: Interrupt handling via OpenPIC
From: Tim Moloney (moloney@mrsl.com)
Date: Wed Apr 11 2001 - 11:00:55 MDT
I am writing a device driver for a custom PMC card, and I'm having
trouble with the interrupt service routine.
Although the PCI configuration block says that the board's interrupt
is 9, I am receiving interrupt 3. I know that the OpenPIC is supposed
to remap the interrupts but I don't quite understand the process.
I've looked at the board's users manual and skimmed the Linux kernel
but I can't find a good example of what to do.
Can anyone provide pointers to documentation, example code, etc. that
shows how I can reconcile what the kernel thinks the interrupt is with
what in actually being generated?
Additional info:
I am developing on a Synergy Microsystems VSS4 board. This is a
quad-G4 VME board that has the following:
IBM MPIC-2 interrupt controller
Motorola MPC106 Grackle PCI bridge/memory controller
Symbios 53c885 Ethernet/SCSI controller
Tundra Universe II PCI-VME64 bridge
DEC/Intel 21554 PCI-PCI bridge
Thanks for any help.
Tim Moloney
ManTech Real-time Systems Laboratory
2015 Cattlemen Road
Sarasota, FL 34232
(941) 377-6775 x208
This archive was generated by hypermail 2a24 : Mon Apr 16 2001 - 09:27:37 MDT