Subject: Re: install of netatlk missing pagecount.ps
From: Kevin B. Hendricks (khendricks@ivey.uwo.ca)
Date: Sat Jul 21 2001 - 11:02:38 MDT
Hi,
I think the spec file is wrong. The file is actually in the source tar
archive.
Try the following:
rpm -i netatalk*.src.rpm
cd /usr/src/rpm/SPECS
rpm -bp netatalk*.spec
cd /usr/src/rpm/BUILD
then cd into the netatalk source tree and you can find the file
pagecount.ps in the tree and copy it to the right place.
Hope this helps,
Kevin
>This is a weird one, the old netatalks installed a
>usr/lib/atalk/pagecount.ps but 1.5pre2 from RH 7.1 powertools doesn't
>install the file as a part of its SRPM and I can't find it after
>installing the SRPM. Is this file really required or was it an erroneous
>error message perhaps?
>
>-jeramy
>
>
>On Fri, 20 Jul 2001, Kevin B. Hendricks wrote:
>
>> Hi,
>>
>> FYI:
>>
>> I tried to install my EtherTalk printer and kept running into the following
>> error message from pap:
>>
>> OF filter msg - '/etc/atalk/pagecount.ps: No such file or directory' at
>> 2001-07-20-12:24:45.310 ## A=root@localhost+322 number=322 process=18325
>>
>> pap seems to need a special piece of postscript code called pagecount.ps.
>>
>> It does not seem to be part of the netatalk rpm.
>>
>> I then grabbed the netatalk src rpm from the YDL 2 Source CD and found the
>> required file there.
>>
>> Perhaps the spec file needs to be updated?
>>
>> Thanks,
>>
>> Kevin
>>
This archive was generated by hypermail 2a24 : Sat Jul 21 2001 - 10:10:47 MDT