Subject: Re: MOL doesn't start
From: Samuel Rydh (samuel@ibrium.se)
Date: Tue Jul 24 2001 - 16:45:50 MDT
On Wed, Jul 25, 2001 at 12:07:32AM +0200, Filippo Fraternali wrote:
> I specified the video resolution and color depth but it was the same. What I
> did not say before is that in both cases I got a black window, MOL window
> with in bracket (video slow).
> here I report the all .log file I get after STARTMOL,
> thanks again
> Fil
>
> **** of_call_method: cmd 'get-key-map' ih: 00000001 (2/2) Args: ***
> nop_'interpret' [1,2] 401007B2*
> Overlap in AddMemoryRelocationEntry().
> * - dst = 0x00EFF000, dstLength = 0x00101000, entry->dst = 0x00C00000,
> entry->dst_len = 0x002FF004.
> of_open: node '//pci/pci-bridge/MacOnLinux
> Video:0' missing
> ************ WARNING, phandle == 0 ***********
> RTAS instantiated at 00004000extra vclaim, virt: 005B1000, size 2F000****
> of_call_method: cmd 'get-key-map' ih: 00000001 (2/2) Args: of_open: node
> '/pci/@d/pci-ata@1/ata-4@0/disk@0:5,\\:bear' missing**** of_call_method: cmd
> 'read' ih: 001064F8 (4/2) Args: 00000200 001163CC*** nop_'close' [1,0]
> 001064F8*
> Stopping at end of FCODE, due to fatal error (see above).
> ********** of_exit *********
> ********* of_quiesce *********
>
You need to run mol-0.9.60 (the MOL developer tree). The
MacOS ROM file you are using is not supported by 0.9.59.
Cheers,
/Samuel
----------------------------------------------------------
E-mail <samuel@ibrium.se> WWW: <http://www.ibrium.se>
Phone/fax: (home) +46 8 4418431, (work) +46 8 7908470
----------------------------------------------------------
This archive was generated by hypermail 2a24 : Tue Jul 24 2001 - 15:54:31 MDT