Subject: multiple sessions help?
From: David R Bosso (dbosso@ltsc.ucsb.edu)
Date: Mon Oct 08 2001 - 21:13:48 MDT
I'm trying to get multiple sessions (full screen) to work reliably on a
biege G3. It's running mandrake 8 with a generic 2.4.10 kernel. Single
sessions work fine, but a second session either results in an endlessly
repeating error:
> Starting in video mode 640*480, depth 32, 74.9 Hz [offs:0, rb:2560]
> Ethernet Interface (port 1) 'sheep-<eth1>' @ FE:FD:DE:AD:BE:EF
> ----> Failed to open /dev/dsp - Sound Disabled
>
> HFS images/moldisk.i MOL <read-only> 0 MB
> ----> (disk_open) Opening /dev/cdrom: No medium found
> HFS /dev/hda11 Util HD <read-write> 292 MB BOOT
>
> Loading 'System Folder:Mac OS ROM' from /dev/hda11
>
> Mapping GC at 80800000
> of_canon: /pci/@d/pci-ata@1/ata-4@0/disk@0 -- ''
> **** of_call_method: cmd 'get-key-map' ih: 00000001 (2/2) Args:
> Instruction Pointer not in ROM/RAM (nip 7C2803A4, nip_phys 7C2803A4)
> Instruction Pointer not in ROM/RAM (nip 7C2803A4, nip_phys 7C2803A4)
> Instruction Pointer not in ROM/RAM (nip 7C2803A4, nip_phys 7C2803A4)
> [...repeating...]
(just noticed that sound didn't initialize here, i wonder if that's
related, sound works when the sessions actually start)
OR dies on startup:
> ***** SIGNAL 11 [Segmentation fault] in thread main-thread *****
> si_signo = 11, si_errno 0, si_code 00030001
> si_addr 0x74617474. Last RVEC: 0x0 (0)
> NIP 74617474
> cleaning up...
> Terminating threads...
> DONE
(this seems to give the 1st session problems like a loss of networking)
OR actually starts up and works. It seems to be more likely (but not
guaranteed) to work if the system has been up a while, or if I wait a while
to start the second session.
I've tried this with both the 0.9.60 release and a grab of the current bk
repository.
Any suggestions?
Thanks.
-David
This archive was generated by hypermail 2a24 : Mon Oct 08 2001 - 20:24:57 MDT