Subject: MOL 0.9.60 + PowerBase 180 + Linux 2.4.10 + MacOS 8
From: Piotr Sieklucki (psiekl@venus.ci.uw.edu.pl)
Date: Mon Oct 08 2001 - 23:43:42 MDT
Hello,
I have the above-mentioned setup, but unfortunately it doesn't seem to work.
The ROM is in the right place but when I run startmol I get...
mac:~/mol# startmol
Loading Mac-on-Linux kernel module:
/usr/lib/mol/modules/0.9.60/2.4.10/mol.o
Warning: loading /usr/lib/mol/modules/0.9.60/2.4.10/mol.o will taint the
kernel: forced load
Loading SheepNet ethernet kernel module:
/usr/lib/mol/modules/0.9.60/2.4.10/sheep_net.o
Warning: loading /usr/lib/mol/modules/0.9.60/2.4.10/sheep_net.o will taint
the kernel: forced load
## Perhaps this is the problem? This shouldn't happen, I've built the
## modules for the current kernel by extracting the .tgz from the
## mol-kmods-0.9.60-4.src.rpm file. I've also tried to compile the whole
## package, but it barfed on video.c.
Copyright (C) 1997-2001 Samuel Rydh <samuel@ibrium.se>
Version 0.9.60
Configuration file: /etc/molrc
Library directory: /usr/lib/mol
Session 0. Lockfile '/var/lock/mol-0'
The session save/restore feature is disabled
OF device tree: oftrees/oftree.powerbase.180
DEC frequency: 10 MHz, 1000:100 mticks/usec
64MB RAM mapped at 0x40000000
Running in PowerPC G3 mode
Property 'cpu/bus-frequency' is missing!
Using ADB keycodes
Using nvram-image 'nvram/nvram.ow'
Running on VT 9.
## Local and remote X displays also don't work :(
Using ps2 mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.
MODE: 800* 600, depth 8,15,32 { 89.8 } Hz
## This is a framebuffer mode which works fine for the console and X.
Starting in video mode 800*600, depth 32, 89.8 Hz [offs:0, rb:3200]
Autoswitching to console
Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
----> Failed to open /dev/dsp - Sound Disabled
HFS images/moldisk.i MOL <read-only> 0 MB
HFS /dev/sda5 untitled <read-write> 2063 MB BOOT
## This is the partition with MacOS 8
53c94 SCSI-driver installed (IRQs 12/0)
Could not register MESH SCSI unit. Need a second bus ??
Swim3 floppy driver installed
4096K ROM mapped at 0x4fc00000 from 'rom/rom.powerbase.180'
## I've followed the instructions -- no VM and disabled extensions.
ROM checksum = 0x150
RVEC Internal Error 700
## And that's more or less it. I couldn't find any reference to this error
## -- can anyone help?
exiting...
leaning up...
Terminating threads...
thread 'SWIM-thread' is active!
DONE
mac:~/mol#
-- Piotr Sieklucki IA & ISNS UW student UIN: 3141856 RLU #134868 _______________________________________________________________________________ Due to a shortage of devoted followers, the production of great leaders has been discontinued.
This archive was generated by hypermail 2a24 : Mon Oct 08 2001 - 23:18:20 MDT