Hello, I'm new to mol and have a question
Percy Zahl
mol-general@lists.maconlinux.org
Fri, 3 May 2002 00:43:16 -0600
I've installed MOL on my PBG4 running Debian/Woody and the 2.4.19-pre7
kernel.
Mol starts end exits like this:
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.nw
Timebase frequency: 24.96 MHz
128MB RAM mapped at 0x40000000
AltiVec unavailable or disabled by user - reverting to G3 mode
Running in PowerPC G3 mode
Could not open /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
Using Linux keycodes
Using nvram-image '/var/lib/mol/nvram.nw'
Video module 'xvideo' installed.
Running on VT 8.
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.
MODE: 640* 480, depth 8,32 { 0.0 } Hz
MODE: 800* 600, depth 8,32 { 0.0 } Hz
MODE: 1024* 768, depth 8,32 { 0.0 } Hz
MODE: 1152* 768, depth 8,15,32 { 54.7 } Hz
MODE: 1152* 864, depth 8,32 { 0.0 } Hz
MODE: 1280*1024, depth 8,32 { 0.0 } Hz
MODE: 1600*1200, depth 8,32 { 0.0 } Hz
Starting in video mode 640*480, depth 32, 0.0 Hz [offs:0, rb:2560]
-----> Can't open /dev/sheep_net, please check module is present !
Failed to initialize the sheep-<eth0> device
Sound disabled
HFS images/moldisk.i MOL <read-only> 0 MB
----> (disk_open) Opening /dev/scd0: No medium found
HFS /dev/hda5 Mac OS System <read-only> 4882 MB BOOT
Loading 'System Folder:Mac OS ROM' from /dev/hda5
Mapping GC at 80800000
RVEC Internal Error 700
exiting...
cleaning up...
Terminating threads...
DONE
I've two questions:
1) RVEC Internal Error 700
exiting...
What does this mean and how to get it fixed?
2) AltiVec unavailable or disabled by user - reverting to G3 mode
My kernel has AltiVec Support enabled... and I have the line
disable_altivec: no
in my /etc/molrc
Looking for some help,
Percy