mol 0.9.65 OSX video boot errors ??

[Eddie Bindt]

Hi,

I upgraded from 0.9.64 ...
MacOS9 works great !

machine iBook1 SE atymach64
320MB RAM
YDL2.3
kernel 2.4.19-ben0 selfbuild

I did rebuild the mol rpms to match my kernel
No difference in the problem between your RPMS and my onw build RPMS ...
We tried the same on a PBG3 from a friend of mine, he had exactly the same 
problem ...

is ther some piece of non-G3 specific code left in the OSX booter ???

--osx boots but 

# more mol.5.log 
Debugger nub disabled
The session save/restore feature is disabled
OF device tree: oftrees/oftree.x
Timebase frequency: 16.64 MHz
192MB RAM mapped at 0x40000000
Running in PowerPC G3 mode
Using Linux keycodes
pci.c: Doesn't look lika a PCI device
heathrow: Couldn't get pci device number
MOL PIC found
No nvram found in device tree
Using nvram-image '/var/lib/mol/nvram.x'
FIXME: IRQ assignement and device identification 
Running on VT 8.
Could not open '/var/lib/mol/console.kbd'
Using usb mouse on /dev/input/mice
Cache enabled for console-video
Video module 'console_video' installed.

MODE:  800* 600, depth 8,15,32   { 74.8 } Hz

Starting in video mode 800*600, depth 32, 74.8 Hz  [offs:0, rb:3200]
Autoswitching to console
Ethernet Interface 'tun-<tun5>' @ 00:00:0D:EA:DB:EE

Disk /dev/hda12                          <read-write> 8183 MB BOOT

Boot device: /mol-blk/disk@0:0
<*> -------------------------------------------
<*> MacOS X boot loader started
<*> Trying to load /mol-blk/disk@0:0,\mach_kernel.mol
<*> Opening partition [/mol-blk/disk@0:0]...
<*> Trying to load /mol-blk/disk@0:0,\mach_kernel
<*> mach kernel read (3678188 bytes)
<*> mol owned memory at 0045D000 (1000)
<*> mregs mapped @ 0045e000 (2000)
<*> MacOS X mkext driver archive read (106988 bytes)
<*> DriversPackage-462000
<*> Command line: '-v'
<*> Framebuffer at 81000000 (800x600)
<*> Jumping to kernel entrypoint...
<*> -------------------------------------------
<*> MOL acceleration for 10.1 (and later)
<*> MOL acceleration for 10.2 (and later)
<*> MolEnet::start
<*> MolEnet: setPowerState 1
<*> MolBlockDriver::starting
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC
Unimplemented store instruction 7C001FEC

this error goes on forever ... I killed the process afte +80M of this in 
the log ...

I see the nice mol penguin and the beginning of OSX ...

than OSX seems to stop ..

running --osx --config=v shows OSX starting up ... I don't see any obvious 
problems there ...


Eddie

--