install on xserve

[Tim Landschoot]

Just the ydl-2.3-11Dec02.iso should be all you need. It was posted after
I sent this e-mail. I had installed the dayton-install-u2.iso version.
But after the install I found that I could not reach gigabit speed on
the onboard NIC and the AGP NIC was not being recognized.  So, terrasoft
put together a couple of RPMs and a new iso that should fix this.  If
you have dayton-install-u2.iso then you should be able to patch it with
the RPM's out there. Or just install the December 02 iso.  I have not
had time to install yet.  So if you install, let me know if it you get
it working or if you have any problems.

Tim

-----Original Message-----
From: Rick Thomas [mailto:Rick.Thomas@pobox.com]
Sent: Wednesday, December 18, 2002 2:34 PM
To: yellowdog-general@lists.terrasoftsolutions.com
Cc: phynes@bbn.com
Subject: Re: install on xserve



Tim,

There are two ISO's there.  Which one?  Do I need both?

Thanks,

Rick


Tim Landschoot wrote:
>=20
>=20
> You need to
> download the Xserve ISO. You can get it here....
>=20
> http://stage.terraplex.com/xserve_iso/
>
_______________________________________________
yellowdog-general mailing list
yellowdog-general@lists.terrasoftsolutions.com
http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general