2.2 install on B/W G3 freezes at setup_arch:bootmem
Timothy A. Seufert
yellowdog-general@lists.terrasoftsolutions.com
Mon Jun 3 03:07:01 2002
At 5:21 PM -0700 6/2/02, A R wrote:
>I have swapped RAM between machines 1 and 3 as well
>as video cards. Machine 1 always works, Machine 3
>never does.
Try moving CPUs as well. It's not too hard to transplant them in the
B&W if all the machines are the same clock frequency (if they were
different speeds, you would have to set jumpers on the motherboards).
If you've ever changed a PC ZIF socket CPU like a modern
Athlon/Duron, it's the same operation, except with a much lower
tension spring clip for the heatsink (which makes it much easier and
less dangerous). Just be sure that you put the clip back on
correctly; if you put it on backwards, the force won't be centered
over the CPU, which could lead to the heatsink tilting so it doesn't
contact the CPU well.
--
Tim Seufert