quik install and boot on a Powerbook 3400

[Henrik Farre]

Yello

On Fri, 21 Jun 2002 13:34:04 -0700
"Timothy A. Seufert" <tas@mindspring.com> wrote:

> device = ata0/ata-disk@0

I've added it to quik.config

> The init-code line turns the LCD backlight on so you can see the quik 
> prompt.  I don't know if it's necessary on the 3400, but on the 2400 
> you can't see a thing without it.

Yes this works. Before I used a small flashlight to see what was on the
black screen :)

> boot-device     ata0/ata-disk@0:3
> boot-file       linux
> boot-command    boot

I have tried that and here is what I get with the diffrent settings::

boot-file linux
boot-device ata0/ata-disk@0:0

# error on boot:
Second-stage QUIK loader
boot: linux
Enter the kernel image as [device:][partno]/path, where partno is a number
from 0 to 16. Instead of /path you can type [mm-nn] to specify a range of
disk blocks (512B)
boot:

--

boot-file linux
boot-device ata0/ata-disk@0:0
boot-command begin ['] boot catch 1000 ms cr again

# error on boot:
Second-stage QUIK loader
boot: l

... ok
copying OF device tree...done
Initing fake screen
Calling quiesc ...
DEFAULT CATCH!, code=FFF00300 at %SRR0: 0012A1F8 %SRR1: 00003070

--
boot-device "ata0/ata-disk@0:a

# error on boot:
Second-stage QUIK loader
boot: l

... ok
copying OF device tree...done
Initing fake screen
Calling quiesc ...
DEFAULT CATCH!, code=FFF00300 at %SRR0: 0012A1F8 %SRR1: 00003070

--

boot-device ata0/ata-disk@0:10/boot/vmlinux-2.2.21-rc3 

# error on boot:
... ok
copying OF device tree...done
Initing fake screen
Calling quiesc ...
DEFAULT CATCH!, code=FFF00300 at %SRR0: 0012A1F8 %SRR1: 00003070

--

boot-device ata0/ata-disk@0:a/boot/vmlinux-2.2.21-rc3 

# error on boot:
boot: ata0/ata-disk@0:a/boot/vmlinux-2.2.21-rc3 
Enter the kernel image as [device:][partno]/path, where partno is a number
from 0 to 16. Instead of /path you can type [mm-nn] to specify a range of
disk blocks (512B)
boot:

--

boot-file /boot/vmlinux root=/dev/hda10

# error on boot:
Read error on block 1986882665
Read error on block 1986882665
Image not found.... try again
boot:

--

boot-file /boot/vmlinux-2.2.21-rc3 

# error on boot:
... ok
copying OF device tree...done
Initing fake screen
Calling quiesc ...
DEFAULT CATCH!, code=FFF00300 at %SRR0: 0012A1F8 %SRR1: 00003070


-- 
Mvh. / Kind regards 
Henrik Farre 
http://www.cs.auc.dk/~enrique
http://www.fsf.org/philosophy/no-word-attachments.html