boot failure

[Tanger]

--Apple-Mail-1-939044654
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed

Hello

I would very much like to use a software called MOL (Mac on Linux) in 
order to access my OS 9.2 partitions form within Linux.  Ever since I 
have installed YDL 2.2 and then 2.3 MOL I have not been able to get MOL 
to work.  According to information from the specific MOL mailing list I 
have learned that the 2.4-kernel that was made part of the YDL 2.3 
distribution, kernel 2.4.19-4a, was faulty.  I have experienced some of 
the other indications for this problem as incapacity to successfully 
install new software.  The suggestion at the MOL mailing list is to 
download a new kernel and install it.  I have downloaded the 2.4.19 
kernel and configuration and installation went without problems.  Except 
now, when I re-boot, the boot process stops here:

Welcome to Linux, kernel 2.4.19

linked at: 0xc0000000
frame buffer at: 0xb6008000 (phys), 0xd0008000 (log)
klimit: 0xc03e0420
MSR: 0x00003030
HID0: 0x8014c0ac
ICTC: 0x00000000

pmac_init(): exit
id mach(): done
MMU:enter
MMU:hw init
hash:enter
hash:find piece
hash:patch
hash:done
MMU:mapin
MMU:setio
MMU:exit
xmon uses screen and keyboard
setup_arch: enter
setup_arch: bootmem
arch: exit
openpic enter
openpic timer
openpic ext
openpic spurious
openpic exit

Please let me know if you have any suggestions as to what I should do.  
My guess is if I could get around this boot problem and somehow get into 
the files, I could check if the yaboot.config file is configured well.

For any help, thank you very much!

Stefan

--Apple-Mail-1-939044654
Content-Transfer-Encoding: 7bit
Content-Type: text/enriched;
	charset=US-ASCII

<fontfamily><param>Times</param>Hello


I would very much like to use a software called MOL (Mac on Linux) in
order to access my OS 9.2 partitions form within Linux.  Ever since I
have installed YDL 2.2 and then 2.3 MOL I have not been able to get
MOL to work.  According to information from the specific MOL mailing
list I have learned that the 2.4-kernel that was made part of the YDL
2.3 distribution, kernel 2.4.19-4a, was faulty.  I have experienced
some of the other indications for this problem as incapacity to
successfully install new software.  The suggestion at the MOL mailing
list is to download a new kernel and install it.  I have downloaded
the 2.4.19 kernel and configuration and installation went without
problems.  Except now, when I re-boot, the boot process stops here:


Welcome to Linux, kernel 2.4.19


linked at: 0xc0000000

frame buffer at: 0xb6008000 (phys), 0xd0008000 (log)

klimit: 0xc03e0420

MSR: 0x00003030

HID0: 0x8014c0ac

ICTC: 0x00000000


pmac_init(): exit

id mach(): done

MMU:enter

MMU:hw init

hash:enter

hash:find piece

hash:patch

hash:done

MMU:mapin

MMU:setio

MMU:exit

xmon uses screen and keyboard

setup_arch: enter

setup_arch: bootmem

arch: exit

openpic enter

openpic timer

openpic ext

openpic spurious

openpic exit


Please let me know if you have any suggestions as to what I should do. 
My guess is if I could get around this boot problem and somehow get
into the files, I could check if the yaboot.config file is configured
well.


For any help, thank you very much!


Stefan

</fontfamily>
--Apple-Mail-1-939044654--