Thanks !!!

[Paolo Aggio]

Aurel Wisse wrote:

> --- Paolo Aggio <zorbas@linuxmail.org> wrote:
>  
>
>> Hi All,
>>
>> On my "iBook 500 G3"...(Dual USB)
>> I am still not having much luck with getting a "Zip
>> 100 USB" drive running under
>> YellowDog Linux 2.3. ( worked ok
>> with Mandrake 8.2 though). The problem is that I
>> cannot mount the device
>> (says device is not a valid block device ...). Also
>> complains about no
>> "block-major-2" module ....
>>
>> My "USB" Printer (Too) dosent work at "ALL" !!!
>>
>>   
>
> Not very specific , check http://www.linux-usb.org/
> and the working devices list. The ZIP drive should
> work afaik.
>
> Do you have usb-storage and scsi support in the
> kernel? Module or compiled in the kernel?
> We need more information to help here.
>
> When you plug in a USB device,  look at the output of
> dmesg | tail, or (as root) tail /var/log/messages.
> Show us  the result.
>
> Aurel
>
>  
>
>> _______________________________________________
>> yellowdog-general mailing list
>> yellowdog-general@lists.terrasoftsolutions.com
>>
>>   
>
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - forms, calculators, tips, more
> http://taxes.yahoo.com/
> _______________________________________________
> yellowdog-general mailing list
> yellowdog-general@lists.terrasoftsolutions.com
> http://lists.terrasoftsolutions.com/mailman/listinfo/yellowdog-general
>
>
>  
>
Thanks a lot for Yours e-mail...
I have to say that Im an a "Beginner"...and im using the defaul Kernel :

[zorbas@localhost zorbas]$ uname -r
2.4.19-4a

As You ask me its  as follow :

[root@localhost zorbas]# dmesg | tail
tas3001c driver version 0.3 (20011214)
using i2c address: 0x34 from device-tree
i2c-core.o: driver TAS3001C driver  V 0.3 registered.
i2c-core.o: client [tas 3001c Digital Equalizer] registered to adapter 
[mac-io 0](pos. 0).
AE-Init tumbler mixer
PowerMac Tumbler  DMA sound driver rev 016 installed
Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07
Write will use    4 fragments of   32768 bytes as default
eth0: Link is up at 10 Mbps, half-duplex.
eth0: Pause is disabled

[root@localhost zorbas]# tail /var/log/messages
Feb 26 10:37:12 localhost pppd[1377]: Using interface ppp0
Feb 26 10:37:12 localhost pppd[1377]: Connect: ppp0 <--> /dev/pts/0
Feb 26 10:37:12 localhost /etc/hotplug/net.agent: assuming ppp0 is 
already up
Feb 26 10:37:12 localhost pppoe[1378]: PPP session is 7472
Feb 26 10:37:12 localhost pppd[1377]: local  IP address 80.180.112.135
Feb 26 10:37:12 localhost pppd[1377]: remote IP address 192.168.100.1
Feb 26 10:37:12 localhost pppd[1377]: primary   DNS address 81.74.224.227
Feb 26 10:37:12 localhost pppd[1377]: secondary DNS address 212.216.112.112
Feb 26 10:37:50 localhost ntpd[782]: kernel time discipline status change 1
Feb 26 10:41:05 localhost su(pam_unix)[1504]: session opened for user 
root by zorbas(uid=500)


I really dont know what to do !!! :-[

Thanks again for Yours Kindness

Looking forwards

Paolo :-)

PS: Sorry 4 My "ENGLISH" too !!!