Open Firmware Problem

[Felix Jodoin]

--Apple-Mail-1-499822614
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=US-ASCII;
	format=flowed

Okay, thanks I will try that.
-Felix

On 13-Apr-04, at 2:01 PM, David C. Hacker, DVM wrote:

> Try zapping the pram by holding down command-option-p-r at boot untill 
> it chimes 2 or 3 times.  If that doesn't work try reformatting the 
> bootstrap partiton and then running ybin again.  Worked for me.  Also 
> you might try unplugging any extra usb devices until you get it worked 
> out.  Especially printers.  Hope this helps.
> David
>
> On Apr 13, 2004, at 12:49 PM, Felix Jodoin wrote:
>
>> Hello,
>> A bit ago I (by accident) changed the startup disc, so YDL doesn't 
>> boot; I just use the boot CD and go into rescue mode to use it. I 
>> decided I would like the menu again, so I re-ran ybin and rebooted. 
>> Open Firmware showed up, displaying a message like:
>> DEFAULT CATCH!, code=300 at %SRR0: 011ee498 %SRR1: 00003030
>> or something along those lines. I am running a 333mhz iMac with 
>> Panther and YDL 3.0.
>> --
>> Felix Jodoin
>> President
>> FJ Studios, Inc.
>> Email: felixj@shaw.ca
>> Phone: (204) 296-4480
--
Felix Jodoin
President
FJ Studios, Inc.
Email: felixj@shaw.ca
Phone: (204) 296-4480

--Apple-Mail-1-499822614
Content-Transfer-Encoding: 7bit
Content-Type: text/enriched;
	charset=US-ASCII

Okay, thanks I will try that.

-Felix


On 13-Apr-04, at 2:01 PM, David C. Hacker, DVM wrote:


<excerpt>Try zapping the pram by holding down command-option-p-r at
boot untill it chimes 2 or 3 times.  If that doesn't work try
reformatting the bootstrap partiton and then running ybin again. 
Worked for me.  Also you might try unplugging any extra usb devices
until you get it worked out.  Especially printers.  Hope this helps.

David 


On Apr 13, 2004, at 12:49 PM, Felix Jodoin wrote:


<excerpt>Hello,

A bit ago I (by accident) changed the startup disc, so YDL doesn't
boot; I just use the boot CD and go into rescue mode to use it. I
decided I would like the menu again, so I re-ran ybin and rebooted.
Open Firmware showed up, displaying a message like:

<fontfamily><param>Times</param><bigger><bigger>DEFAULT CATCH!,
code=300 at %SRR0: 011ee498 %SRR1: 00003030 

</bigger></bigger></fontfamily>or something along those lines. I am
running a 333mhz iMac with Panther and YDL 3.0.

--

Felix Jodoin

President

FJ Studios, Inc.

Email: felixj@shaw.ca

Phone: (204) 296-4480

</excerpt></excerpt>--

Felix Jodoin

President

FJ Studios, Inc.

Email: felixj@shaw.ca

Phone: (204) 296-4480


--Apple-Mail-1-499822614--