MOL will not launch

[Matt Turner]

I purchased YDL 3.0 and it installed fine.  However, I cannot use MOL
(to launch into OSX)as I get an error that I'm running old-world ROM. 
The machine I'm using is a Powerbook Firewire (PISMO,2000).  See below
for the copy of the response when attempting to load MOL:

Mac-on-Linux 0.9.68 Copyright (C) 1997-2003 Samuel Rydh
Starting MOL session 0
Loading Mac-on-Linux kernel module:
   /usr/lib/mol/0.9.68/modules/2.4.20-8d/mol.o
Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/mol.o will taint
the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module mol loaded, with warnings
Loading SheepNet kernel module:
   /usr/lib/mol/0.9.68/modules/2.4.20-8d/sheep.o
Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/sheep.o will
taint the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module sheep loaded, with warnings
Loading tun driver kernel module:
   /usr/lib/mol/0.9.68/modules/2.4.20-8d/tun.o
Warning: loading /usr/lib/mol/0.9.68/modules/2.4.20-8d/tun.o will taint
the kernel: forced load
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module tun loaded, with warnings
Running in PowerPC G3 mode, 48 MB RAM
Timebase: 24.96 MHz, Bus: 99.86 MHz, Clock: 400 MHz
Using USB mouse on /dev/input/mice
Could not open '/var/lib/mol/x11.kbd'
Fullscreen video on VT 8.
Could not open '/var/lib/mol/console.kbd'
Cache enabled for console-video
Video driver(s): [xvideo] [console_video]

     640* 480, depth 8,15,32   { 59.9, 72.1, 74.9, 89.9, 99.7, 116.6 }
Hz
     800* 600, depth 8,15,32   { 56.2, 60.3, 70.0, 72.1, 74.9, 89.9,
94.8, 99.9 } Hz
    1024* 768, depth 8,15,32   { 60.0, 70.0, 72.2, 74.8, 75.0, 75.0,
90.2 } Hz
    1152* 768, depth 8,15,32   { 54.7 } Hz
    1280* 854, depth 8,15,32   { 60.0 } Hz
    1152* 864, depth 8,15,32   { 59.9, 69.9 } Hz
    1280*1024, depth 8,32   { 0.0 } Hz
    1600*1200, depth 8,32   { 0.0 } Hz

Ethernet Interface (port 1) 'sheep-<eth0>' @ FE:FD:DE:AD:BE:EF
DHCP nameserver exported: 207.115.64.2
Ethernet Interface (port 2) 'tun-<tun0>' @ 00:00:0D:EA:DB:EE

    CD   /dev/cdrom       CD-ROM         <read-only>   ------
    HFS+ /dev/hda2         x             <rw> 28708 MB
----> /dev/hda3 might be a boot-strap partition.
No volumes found in '/dev/hdb'
No volumes found in '/dev/sda'
No volumes found in '/dev/sdb'


>> =============================================================
>> Mac-on-Linux OpenFirmware 0.9.12
>> os_seek error

>> --- No bootable disk was found! -----------------------------
>> If this is an oldworld machine, try booting from the MacOS
>> install CD and install MacOS from within MOL.
>> -------------------------------------------------------------
cleaning up...
Terminating threads...
DONE


Please someone help.  Is this having to do with an install issue?  Is it
an ROM issue?  I am also concerned about the RAM amount showing as 48
MB's (see highlighted).  Is this the amount of RAM not being utilized
already by Linux.  My system has 1GB of RAM and at install it would only
recognize up to 768 MB's.