ANOTHER mol question

[Roger Scow]

Hello, all.

Still flailing away trying to get mol to run on my iBook 800/YDL
3.01/OSX.3.5

When I type startmol -X, I get a full screen picture and the tux/apple
logo.  The osx spinning wheel thing spins and spins.

When I examine the terminal, I don't see any errors, see below:

The question is about the DHCP nameserver entry.  Where does this ip
address come from?  OSX?  I haven't assigned it.  It is the static
address I use at work.

Should I change this some way?  Which file do I edit?

Roger
See below for exerpt from console, and the whole thing.

> Autoswitching to console
> DHCP nameserver exported: 66.196.0.1
> Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
> MOL SCSI controller registered
> 
> 
>  startmol -X --keyconfig
> Mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh
> Starting MOL session 1
> Loading Mac-on-Linux kernel module:
>    /usr/lib/mol/0.9.69/modules/2.4.22-2g/mol.o
> Warning: loading /usr/lib/mol/0.9.69/modules/2.4.22-2g/mol.o will taint the kernel: forced load
>   See http://www.tux.org/lkml/#export-tainted for information about tainted modules
> Module mol loaded, with warnings
> Loading tun driver kernel module:
>    /usr/lib/mol/0.9.69/modules/2.4.22-2g/tun.o
> Warning: loading /usr/lib/mol/0.9.69/modules/2.4.22-2g/tun.o will taint the kernel: forced load
>   See http://www.tux.org/lkml/#export-tainted for information about tainted modules
> Module tun loaded, with warnings
> Unknown processor id (70000202).
> Running in PowerPC 750 mode, 96 MB RAM
> Timebase: 24.83 MHz, Bus: 99.34 MHz, Clock: 800 MHz
> Failed to lookup IRQ
> Using USB mouse on /dev/input/mice
> Could not open '/var/lib/mol/x11.kbd'
> Failed to lookup IRQ
> Fullscreen video on VT 8.
> Could not open '/var/lib/mol/console.kbd'
> Cache enabled for console-video
> Video driver(s): [xvideo] [console_video]
> 
>      640* 480, depth 8,15,32   { 59.9, 72.1, 74.9, 89.9, 99.7, 116.6 } Hz
>      800* 600, depth 8,15,32   { 56.2, 60.3, 70.0, 72.1, 74.9, 89.9, 94.8, 96.3, 99.9 } Hz
>     1024* 768, depth 8,15,32   { 0.0, 60.0, 70.0, 72.2, 74.8, 75.0, 75.0, 86.9, 90.2, 99.7 } Hz
>     1152* 768, depth 8,15,32   { 54.7 } Hz
>     1280* 854, depth 8,15,32   { 60.0 } Hz
>     1152* 864, depth 8,15,32   { 59.9 } Hz
>     1024*1024, depth 8,15,32   { 103.6 } Hz
>     1152* 864, depth 8,15,32   { 69.9, 74.9, 79.7, 87.0, 94.8 } Hz
>     1280*1024, depth 8,15,32   { 60.0, 60.0, 70.0, 74.1, 75.0, 94.9 } Hz
>     1600*1200, depth 8,15,32   { 59.9, 65.9, 76.1 } Hz
> 
> Autoswitching to console
> HACK: Mapping framebuffer to 81000000
> Failed to register sound card
> 
> 
> VideoMode: 640 x 480, Depth: 32
> Keymapping sucessfully saved to '/var/lib/mol/console.kbd'
> Keymapping sucessfully saved to '/var/lib/mol/x11.kbd'
> cleaning up...
> Terminating threads...
> DONE
> [rscow@localhost rscow]$ startmol -X
> Mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh
> Starting MOL session 1
> Unknown processor id (70000202).
> Running in PowerPC 750 mode, 96 MB RAM
> Timebase: 24.83 MHz, Bus: 99.34 MHz, Clock: 800 MHz
> Using USB mouse on /dev/input/mice
> nvram, read_image: open: No such file or directory
> Creating nvram-image '/var/lib/mol/nvram.x'
> OHCI USB controller registered
> Fullscreen video on VT 8.
> Video driver(s): [xvideo] [console_video]
> 
>      640* 480, depth 8,15,32   { 59.9, 72.1, 74.9, 89.9, 99.7, 116.6 } Hz
>      800* 600, depth 8,15,32   { 56.2, 60.3, 70.0, 72.1, 74.9, 89.9, 94.8, 96.3, 99.9 } Hz
>     1024* 768, depth 8,15,32   { 0.0, 60.0, 70.0, 72.2, 74.8, 75.0, 75.0, 86.9, 90.2, 99.7 } Hz
>     1152* 768, depth 8,15,32   { 54.7 } Hz
>     1280* 854, depth 8,15,32   { 60.0 } Hz
>     1152* 864, depth 8,15,32   { 59.9 } Hz
>     1024*1024, depth 8,15,32   { 103.6 } Hz
>     1152* 864, depth 8,15,32   { 69.9, 74.9, 79.7, 87.0, 94.8 } Hz
>     1280*1024, depth 8,15,32   { 60.0, 60.0, 70.0, 74.1, 75.0, 94.9 } Hz
>     1600*1200, depth 8,15,32   { 59.9, 65.9, 76.1 } Hz
> 
> Autoswitching to console
> DHCP nameserver exported: 66.196.0.1
> Ethernet Interface 'tun-<tun1>' @ 00:00:0D:EA:DB:EE
> MOL SCSI controller registered
> 
>     /dev/sg0 SCSI-<0:0:0> CD/DVD TOSHIBA  DVD-ROM SD-R2212 1P19
> 
>     SCSI /dev/cdrom  [skipped - handled as a raw SCSI device]
>     HFS+ /dev/hda9                       <rw> 66083 MB
> ----> /dev/hda10 might be a boot-strap partition.
> No volumes found in '/dev/hdb'
> No volumes found in '/dev/sda'
> No volumes found in '/dev/sdb'
> 
> 
> >> ==================================================
> >> MacOS X Boot Loader 1.1.18
> >> Candidate boot volume: /mol-blk@0/disk@0:0
> >> /mol-blk@0/disk@0:0,\mach_kernel (3859004 bytes)
> >> /mol-blk@0/disk@0:0,\System\Library\Extensions.mkext
> >> ==================================================
> 
> <*> Block Driver v1.1
> <*> SCSI driver v1.03
>