Subject: Re: I tried mol-0.9.54 and... failed :-(
From: Samuel Rydh (samuel@ibrium.se)
Date: Wed Jan 24 2001 - 14:19:18 MST
On Wed, Jan 24, 2001 at 07:12:27PM +0100, Philippe Lelédy wrote:
> On Tue, 23 Jan 2001, Anne et Bertrand wrote:
>
> > When upgrading, did you change the nvram file ? Did you try to boot mol-0.9.54 with the
> > previous nvram file ? If I remember well, I had the same problem when upgrading to
> > mol-0.9.50 or 51, and my rpmsaved nvram (that was a rpm upgrade...) did work.
> >
> > Bertrand Dekoninck
> >
>
> Yes, this was usefull in this old time and I successfully switched to new
> mol thanks to this advice.
>
> Now things have changed, no more nvram in /etc/molrc !
> But a new file nvram_image_nw with no choice.
>
> 96MB RAM mapped at 0x20000000
> Running in PowerPC 750 mode (G3)
>...
> Using nvram-image 'nvram_image_nw'
>...
> Using usb mouse on /dev/usbmouse
> Cache enabled for console-video
> Video module 'console_video' installed.
Aha, the bug is that MOL looks for the file 'nvram_image_nw' rather
than looking up the 'nvram_image_nw' resource in /etc/molrc
and /usr/lib/mol/config/molrc.sys.
I'll fix this bug and upload 0.9.55 tomorrow.
>
> **** SIGNAL Hangup in thread async-io thread ****
> Exiting due to a crashed thread
> cleaning up...
> **** SIGNAL Hangup in thread <non-registered thread> ****
> **** SIGNAL Hangup in thread startboing ****
>
Did you manually send the hangup signal? If not, I'll have to
investigate this. The startmol script sends a HUP signal when the
debugger exits - nothing else should be sending HUPs.
/Samuel
----------------------------------------------------------
E-mail <samuel@ibrium.se> WWW: <http://www.ibrium.se>
Phone/fax: (home) +46 8 4418431, (work) +46 8 7908470
----------------------------------------------------------
This archive was generated by hypermail 2a24 : Wed Jan 24 2001 - 14:19:30 MST